RECOMMENDATIONS FOR INSTALLATION AND MAINTENANCE
THE WARRANTY OF PRODUCTS AND THE MANUFACTURER RESPONSIBILITY SHALL AUTOMATICALLY TERMINATE AND BECOME NULL AND VOID IF THESE RECOMMENDATIONS FOR INSTALLATION AND USE ARE NOT FOLLOWED.
|
Make sure that the performance of the product described in the technical specifications cover the needs of the installation in which it will be installed. |
|||||||||||||||||||||
|
TUCAI embosses the quality mark met by the product on the stainless steel sleeve. Make sure that the product complies with the law in force (sanitary and mechanical performance norms) in the country where the product is installed. In case of doubt, please contact the TUCAI Distributor of the country in which the flexible connector is going to be installed. |
|||||||||||||||||||||
|
Before installing the flexible connector, always check that the sleeve is correctly pressed. If there is any doubt, do not install the flexible connector. |
 |
||||||||||||||||||||
|
Connecting to the faucet: hand screw the male connector after checking that the O-ring is correctly positioned. It is not necessary to use any wrench. Apply a maximum grip torque of 3 Nm. Hand screw the nuts after checking that the seal is correctly positioned. Lastly, tighten a quarter turn with the appropriate wrench. Do not use inappropriate tools that may damage the product. |
 |
||||||||||||||||||||
|
Flexible connectors must be installed in open view; they must not go through the wall. Never insulate a flexible connector with galvanized steel braid (River range). |
 |
||||||||||||||||||||
|
For appropriate operation, always install a flexible connector with an elbow or a straight section of sufficient length before bending (1.5-2 times the outside diameter). |
 |
||||||||||||||||||||
|
Observe the minimum bending radius specifically indicated for each diameter.
Minimum bending radius (mm)
|
 |
||||||||||||||||||||
|
Do not install flexible connectors so that they are stretched or twisted. |
 |
||||||||||||||||||||
|
Prolonged contact with cleaning products or aggressive chemicals may damage the outer braiding and cause leaks. Periodically check the status of the flexible connector and substitute it in case of any damage or tear and wear of the braid. |
 |
||||||||||||||||||||
|
Check the ground connection of household appliances (air-conditioning units, whirpool bath, etc.) connected to flexible connectors as any electrical dispersion may cause the corrosion of the flexible connector. |
 |
||||||||||||||||||||
|
More than one flexible must not be fitted end to end under any circumstances. Use the appropriate overall length. |
 |
||||||||||||||||||||
|
Once the connector is installed, revise the installation in order to identify a possible leakage. |